FastBoot Mode Started udc_start() AnDroid Error - Solution 2

Hello All,

Seems like my earlier post on fixing the fastboot issue was not helpful for some guys.
Here is an alternate & an easy solution to fix the below issue.

- Message displayed while tryin to power on the device :-

fastboot mode started
udc_start()

 - And the below message while connecting the USB :-

fastboot mode started
udc.start()
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --e --



                    Note :- USB Mode Debugging should be enabled on your Android Phone.

Pre-Requisites :
1. A Windows PC & USB cable.
2. AndroiD phone (Has been tested on LG P500)
3. Download Android Flash Recovery (Say ThanX to Shinobisoft for developing the tool)
4. Download Amonra Recovery

Steps To Be Followed :

1. Firstly download Android Flash Recovery & Amonra Recovery to your machine & unzip it.

2. Now switch on your phone & wait for the fastboot message. Connect it to your Computer using USB Cable.

3. Next step is to execute androidflashrecovery.exe from the Android Flash Recovery folder. You should get the message Device:Connected at the bottom of the window.

4. In case your device is not discovered/Connected then try below options & Retry Step 3.
 - Try from a Different Machine preferably Windows XP.
 - Download PDANet & Install the Application (Let it Install the Drivers).

5. Now click on the browse button & select recovery file under recovery-amonra folder.

6. Check the status in your device, in 2-3 minutes the device should go into recovery mode.

Your device is now Reborn, Flash a new ROM & Enjoy.
Check out this area to Flash ICS Rom in your LG Optimus One.

[Note: Do it at your own risk. I will not be responsible if your data gets lost or your phone bricks.]